logo
Menu
Fermer

Request for recommendation

*Mandatory elements

Find a distributor

Close

Need information about : STERILE GARMENT – WEEPRO LABO STERILE ?

Logo

STERILE GARMENT – WEEPRO LABO STERILE

CLEANROOM GARMENT

FEATURES AND BENEFITS :

Cleanroom apparel compatible from Iso class 4. Apparel sterilized by gamma irradiation Coverall meets Category 3 Type 5/6. Bound seams and tunneled elastics. Elasticated thumb loop. Three-panel hood. Adhesive protective flap. Double packaging fully sealed.

BONUS ADD-ON :

New material MICROMIUM®, light and very low contaminant

In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically.

The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method.

This new cleanroom clothing meets all of the latter requirements of ESP RP CC003.4, namely :

Properties of the materials used in the design: non-contaminant material. The MICROMIUM® fabric meets the chemical and biological risk requirements and is treated with an antistatic coating.

Design of the clothing: Manufacture in a controlled environment Enhanced comfort with raglan sleeves and 3 section hood.

Construction of the clothing: The tunnelled seam technology is used on all clothing and the elastic is fully bound. All of the sewn sections are consequently covered and create a barrier against fine particles.

Final package: All of the cleanroom clothing benefits from a double sealed package. Air free interior.

Coverall protective clothing, Body protection, personal protection equipment, single use suit, personal safety gear, protective garment, PPE, sms, comfort, works, manipulation, high permeability,  EN 13982-1, EN 13034, EN 1073-2,EN 1149-5

AREA OF APPLICATIONS

– Pharmaceutical and cosmetic industries
– Biotech and research lab
– High-tech industries
– Medical device

…..PROTECTION STANDARDS
…..…..Type 5 : EN ISO 13982-1 : Protection against hazardous dry particulates
…..…..Type 6 : EN ISO 13034 : Protection against light spray of liquids

SIZES: S to XXXL

FEATURES AND BENEFITS :

Cleanroom apparel compatible from Iso class 4. Apparel sterilized by gamma irradiation Coverall meets Category 3 Type 5/6. Bound seams and tunneled elastics. Elasticated thumb loop. Three-panel hood. Adhesive protective flap. Double packaging fully sealed.

BONUS ADD-ON :

New material MICROMIUM®, light and very low contaminant

In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically.

The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method.

This new cleanroom clothing meets all of the latter requirements of ESP RP CC003.4, namely :

Properties of the materials used in the design: non-contaminant material. The MICROMIUM® fabric meets the chemical and biological risk requirements and is treated with an antistatic coating.

Design of the clothing: Manufacture in a controlled environment Enhanced comfort with raglan sleeves and 3 section hood.

Construction of the clothing: The tunnelled seam technology is used on all clothing and the elastic is fully bound. All of the sewn sections are consequently covered and create a barrier against fine particles.

Final package: All of the cleanroom clothing benefits from a double sealed package. Air free interior.

Coverall protective clothing, Body protection, personal protection equipment, single use suit, personal safety gear, protective garment, PPE, sms, comfort, works, manipulation, high permeability,  EN 13982-1, EN 13034, EN 1073-2,EN 1149-5